Seachem Marine Buffer 250g

Seachem Marine Buffer is a blended product that will safely raise marine pH to 8.3. It contains sodium, magnesium, calcium, strontium, and potassium salts of carbonate, bicarbonate, chloride, sulfate, and borate to help maintain pH level. Seachem Marine Buffer will not raise pH above 8.3 even if inadvertently overdosed.

Directions for use:
Add 5 g (1 level teaspoon) for each 20 gallons. Dissolve in at least one cup of freshwater. This dose will also raise alkalinity by about 1 meq/L. Add daily until pH stabilizes at 8.3. This will take from a day to a week, depending on original pH and alkalinity. Thereafter, use bi-weekly or monthly to maintain a pH of 8.3. If this practice is not adequate, then overstocking, overfeeding, or other poor management practice should be sought as a likely cause. In ionically balanced marine water, Marine Buffer produces little precipitate or cloudiness. If an extensive precipitate forms upon addition of Marine Buffer™ that does not dissolve within ~15 minutes, then poor ionic balance was present. A water change should be initiated when convenient before further use of the product. Effectiveness improves with continued use. Do not directly mix with any calcium, magnesium, or strontium supplement.

* Ingredients and dosage listed are for informational purposes only and are subject to change by the manufacturer. Always refer to the manufacturer and actual product label/inserts for current ingredients, recommended dosage, precautions and warnings before use.